Engineering RF systems for dependable global connectivityinfo@rfsatellite.com
Home / Products / RFSTRISYN-0110
100MHz-10GHz Low Phase Noise Frequency Synthesizer RFSTRISYN-0110
RFSTRISYN-0110

100MHz-10GHz Low Phase Noise Frequency Synthesizer RFSTRISYN-0110

RFSTRISYN-0110 is a modular low-phase-noise frequency synthesizer covering 100MHz-10GHz with ≤-130dBc/Hz phase noise at 10GHz/10kHz offset, 0.001Hz synthesis resolution, -10 to +10dBm output, built-in 100MHz OCXO, USB/SPI control and single +13V supply.

Project-based configurationEngineering selection supportWorldwide B2B supply
Technical information

Product details

Product Overview

The RFSTRISYN-0110 is a modular wideband frequency synthesizer with an output frequency range of 100 MHz to 10 GHz, offering phase noise and signal purity comparable to high-end desktop instruments. It features a built-in 100 MHz OCXO, achieving ≤130 dBc/Hz @ 10 kHz at 10 GHz, with baseband spurious better than –80 dBc from 5 to 10 GHz. The module is controlled via USB or SPI and requires only a single +13 V supply, serving as an economical alternative to expensive desktop signal generators.

Key Features

  • Output frequency: 100 MHz – 10 GHz

  • Output power: –10 to +10 dBm (1 dB step, ±2 dB accuracy)

  • Phase noise: ≤ –130 dBc/Hz @ 10 kHz (10 GHz carrier)

  • Frequency synthesis resolution: 0.001 Hz

  • Built-in 100 MHz OCXO; stability ±5 × 10⁻⁸

  • Non-harmonic spurious: ≤ –80 dBc (5–10 GHz)

  • USB or SPI control

  • Frequency switching time: ≤ 5 ms

  • Single +13 V supply; SMA female connectors

Product Information

ModelRFSTRISYN-0110
Product CategoryOTHER (Frequency Source)
TypeModular wideband low-phase-noise frequency synthesizer
Output Frequency100 MHz – 10 GHz
Frequency Resolution0.001 Hz
Output Power–10 to +10 dBm (1 dB step, ±2 dB accuracy)
Phase Noise (10 GHz)≤ –130 dBc/Hz @ 10 kHz
Non-Harmonic Spurious5–10 GHz: ≤ –74 dBc; 2.5–5 GHz: ≤ –80 dBc; 1.25–2.5 GHz: ≤ –86 dBc; 0.625–1.25 GHz: ≤ –92 dBc; 0.1–0.625 GHz: ≤ –98 dBc
Harmonics≤ –20 dBc
Frequency Switching Time≤ 5 ms
Reference Stability±5 × 10⁻⁸ (internal 100 MHz OCXO)
Aging (100 MHz OCXO)±1 × 10⁻⁷ per year
Warm-up Time15 / 20 / 30 min
Supply Voltage+12.5 to +13.5 V DC (+13 V typ.)
Supply Current3000 mA (warm-up) / 2500 mA (after warm-up)
Interfaces10 MHz reference input, RF output, +13 V power, USB, SPI (CTRL)
RF ConnectorsSMA female (10 MHz in / RF out)
Operating Temperature0 to +50 °C
Storage Temperature–20 to +60 °C
Dimensions177.8 × 127 × 25.4 mm
ApplicationsHigh-spectrum-purity local oscillator embedded solutions, test and measurement, ADC/DAC design and verification, next-generation high-data-rate systems

Specifications subject to change without prior notice. Contact RFsatellite for the latest data and project-based configuration.